Airy Auto Stabilizing Pack for 250-450 Class CP Helicopter [000012]

Use it on "Fun" projects
This 6-Channel RX2610S receiver has a 3-Axis Gyro built in, it is the standard equipment on the Walkera 4G6S Helicopter. We put it on a Storm 450 Glass Fiber Helicopter and it flew extremely well, like 50% easier to hover than ordinary Helicopter! But I gotta warn you, this kit is for those who has creativity and DIY players, only experienced players can put this pack onto other 450 helicopters like Align Trex 450.

Great on 250 to 450 class CP Helicopters
About the RX2610S receiver, it is a 3-in-1 electronics with a 6-Channel 2.4Ghz receiver, a 3-Axis Gyro and a mixer. When it sense any movements, it will give correction to "Elevator", "Aileron" and "Rudder" servos, that means if your Airplane is being moved by Wind, it will counter-act the drifting, amazing isn't it? However, I have some facts confimred, I wish to share with you guys :


Receiver Placement + Servo Directions = Infinity Possbilities!
By moving the receiver's position and switching Servos Reverse, you can basically put this pack onto any 250-450 class CP Helicopters

Recevier's placement is important
The receiver does not have "Servo Reverse" switch, so how you place the receiver will affect the direction of the servo's counter-action. Try every direction of the receiver's placement until you get correct servo's counter-action, then you can fix the receiver on the aircraft.

Recevier lay flat on the aircraft
Do not place it vertical, that's wrong.

Maximum servo size is 9g servos
Larger than 9g servos will burnt the receiver!

Able to use 11.1V batteries
We put a 30A ESC into the THRO port, then we used 3 cell Li-Po battery, it worked!

Able to adjust every channel's sensibility
The dial on the receiver is the sensibility knob, try all of them!

Requires Walkera Transmitters
Tested the followings can be used : WK2801-Pro / WK2602


This package includes :
1. Walkera RX2610S 6-Channel 2.4Ghz Receiver (Built-in 3-Axis Gyro)
2. Micro Servo to Standard Servo Converter (5 pcs)

You will need :
1. Walkera Transmitter WK2801-Pro / WK2602
2. ESC
3. Motor
4. 4 Servos (max. 9g micro servo)
5. Battery(max. 11.1V battery)


Suitable for :


Important Declaration - Read Before Purchase
Please note that, this is a fun project, not a formal product, it will requires your creativity to put it on, please don't ask Helipal about how to install it. If you wish to upgrade any park size airplane to have Auto Stabilizing function, this pack will do it. And since this receiver was originally being used on Walkera 4G6S, it should work on any 250-450 class CP helicopters.