Airy Auto Stabilizing Pack for Fixed Pitch Heli / Planes [000013]

Use it on "Fun" projects
This 4 -Channel RX2433 receiver has a 3-Axis Gyro built in, it is the standard equipment on the Walkera 4#6S Fixed Pitch Helicopter. We have a lot of thoughts about this receiver, like using it on other Fixed Pitch helis and Planes, and guess what, we succeed! But I gotta warn you, this kit is for those who has creativity and DIY players, please don't ask Helipal about how to install it....

Great on Fixed Pitch Heli and Planes
About the RX2433 receiver, it is a 2-in-1 electronics with a 4-Channel 2.4Ghz receiver and a 3-Axis Gyro. When it sense any movements, it will give correction to "Elevator", "Aileron" and "Rudder" servos, that means if your Airplane is being moved by Wind, it will counter-act the drifting, amazing isn't it? However, I have some facts confimred, I wish to share with you guys :


Recevier's placement is important
The receiver does not have "Servo Reverse" switch, so how you place the receiver will affect the direction of the servo's counter-action. Try every direction of the receiver's placement until you get correct servo's counter-action, then you can fix the receiver on the aircraft.

Recevier lay flat on the aircraft
Do not place it vertical, that's wrong.

Maximum servo size is 9g servos
Larger than 9g servos will burnt the receiver!

Only One Aileron Servo is allowed
The receiver does not have mixing, you need to place the aileron servo in the wing center to control both aileron wings.

Able to use 11.1V batteries
We put a 30A ESC into the THRO port, then we used 3 cell Li-Po battery, it worked!

Able to adjust every channel's sensibility
The dial on the receiver is the sensibility knob, try all of them!

Requires Walkera Transmitters
Tested the followings can be used : WK2402 / WK2602 in 4-Ch mode / WK2801 in 2401 mode


This package includes :
1. Walkera RX2433 4-Channel 2.4Ghz Receiver (Built-in 3-Axis Gyro)
2. Micro Servo to Standard Servo Converter (4 pcs)

You will need :
1. Walkera Transmitter WK2402 / WK2602 in 4-Ch mode / WK2801 in 2401 mode
2. ESC
3. Motor
4. 3 Servos (max. 9g micro servo)
5. Battery(max. 11.1V battery)


Suitable for :


Important Declaration - Read Before Purchase
Please note that, this is a fun project, not a formal product, it will requires your creativity to put it on, please don't ask Helipal about how to install it. If you wish to upgrade any park size airplane to have Auto Stabilizing function, this pack will do it. And since this receiver was originally being used on Walkera 4#6S, it will work on fixed pitch helicopters.